[Front Bumpers:
F355 Style #1:







$650 This style does not utilize the belt line molding/arrow pieces or the side marker lights from your stock bumper. This bumper uses lights from a 1997 - 2000 Chrysler Sebring Coupe. 

F355 Style #2:







$650 The style #2 bumper is exactly the same as the Style #1 except this style allows you to utilize the belt line molding/arrow pieces and the side marker lights from your stock bumper. This bumper uses lights from a 1997 - 2000 Chrysler Sebring Coupe.
FW/SG F355





$650
Munson Style #1:




$650
Munson Style #2:




$650
Munson Style #3:





$650
Stock:




$650]

[Front Spoilers: 
Standard



GT Open 



GT Closed



Chin Spoiler: 
GT]

[Front Fenders:
Wide: 
$600






On Fieros using stock rocker panels, some modifications are required. Designed to provide proper wheel coverage for modern wheels and tires, and to provide an attractive wheel well opening.]

[Dash:
FF Dash #2: 
$350 Dash Style #2 is a 1 piece dash. This dash is a direct replacement for the stock Fiero dash, but will require you to make custom mounting brackets and modify the vent ductwork. All of your stock Gauges, Vents, HVAC Controls and so on can be used with this dash.]

[Roof:
Sunroof Blankout Panel
This panel can be stored under the hood in the stock storage area when not in use.]

[Sail Window Panels:
Open Air GT
These fit the GT Fastback Style Fiero's only.
$350







Louvered GT Sail Windows 

These fit the GT Fastback Style Fiero's only
$350]

[Side Scoops:
GT Style #1: 
$450 Fit all GT Fieros w/ Ground effects
This style has the ground effects molded right into the fiberglass so as it meets up with the door, the ground effects blend right into the scoops itself instead of traveling all the way to the back wheel.















GT Style #2: 
$450 These scoops are the Non GT Style with stock ground effects attached to them. . This style allows the buyer to attach their own ground effects pieces, off the stock panels. This style is for people who would like to keep the stock look of the ground effects to travel from the door to the back wheel. Simply drill out the mounting holes and attach the ground effects pieces.









Non-GT: 
$450 They fit all Non GT Fiero's that do not have ground effects.





IMSA Style:
$450 They fit all GT and non GT Fiero's. GT owners would have to attach their own ground effects pieces.







Full Panel: 
$450 

Turbo Style:
$450
Old School Open Air:
$450]

[Side Intake Scoops:
Gen 1
Replaces stock side grill opening


Gen 2]

[Ground Effects: 
Tapered GT
4 piece set that taper down toward the front wheel instead of just the stock straight pieces. These flow nicely with all of our GT Scoops and go well with the F355 front bumper. 






Twisted Rockers
FW/SG Rocker Panels]

[Rear Hips:
FF Rear Hip Kit: 
Set of hips, two caps $600]

[Stock:
$650 


F355:
$650 







When using this bumper, you will need to remove the metal bumper that is underneath your stock rear bumper. This creates somewhat of a saftey issue. This bumper also does not use reflectors like the stock bumper and may be illegal in some states. Check your local laws before purchasing this bumper. By purchasing and installing this bumper, you acknowledge these issues and assume all responsiblity for injury, death and or damage that may be caused by or in an accident. Fiero Fiberglass, and it's associates, is not and can not be held liable for any of the forementioned issues.

F360:
$650 




When using this bumper, you will need to remove the metal bumper that is underneath your stock rear bumper. This creates somewhat of a saftey issue. This bumper also does not use reflectors like the stock bumper and may be illegal in some states. Check your local laws before purchasing this bumper. By purchasing and installing this bumper, you acknowledge these issues and assume all responsiblity for injury, death and or damage that may be caused by or in an accident. Fiero Fiberglass, and it's associates, is not and can not be held liable for any of the forementioned issues.]

[Wings:
2”-8” stands





7” flared stands
These stands differ from the other style we make by having the bottom flared. The stock gasket is no longer required, but can be used if so desired, it will just be completley covered by the bottom of the new stand. The other major difference is the attachment method. The original style has a stud and two T-nuts glassed into the bottom of the stand. The new style utilizes the Factory original Hardware. You drill the holes,(which are marked in the stock location), and thread in the factory studs from your original stands. This new style stand is available only in the 7" size.





Fastback Highrise Wing
For GT Fastback Fieros



Rear Wing Spoiler
The Spoiler fits directly on the stock Fiero rear deck and provides aerodynamic down force on the rear of the car at high speeds. This results in improved traction and handling stability.

Whale Tail Spoiler: 
The Whale Tail Spoiler is derived from the IMSA GT Fastback, and is designed to fit 86 thru 88 GT 


IMSA wraparound wing: 

$450]

[Taillight Panels: 
C3: 
$450 blank, $650 w/ lenses and primer 86-88 Pontiac Fiero Gt


C4: 
$450 blank, $650 w/ lenses and primer 86-88 Pontiac Fiero Gt



Cobalt:
$550 blank, $750 w/ lenses & primer]

[Indy Pace Car Scoop:



designed to maintain the styling of the air scoop used on the 1984 Indy 500 Fiero Pace Car. The scoop mounts in the center of the rear deck, and contains a gas strut and latching system which allows it to clear the roof when the rear deck is raised. The scoop is for styling only, and is not intended to be functional.]

[Latch Cover: 
Fastback Latch Cover]

[Widebody:
Only front half available.





IMSA GTU:
Pontiac produced a bolt-on street version of the Fiero Racing Cars which were successfully campaigned in the IMSA GTU category. These bodies represent the three styles of the cars raced by Pontiac in 84, 85 and 86 thru 88

Standard Notchback



GT Notchback



GT Fastback




Convertible: 

Our convertible kit is fully functioning, unlike others. It includes the fiberglass body panels, top frame, material and a reinforcement frame with removable center X  (this allows access to the fuel cell if it is ever necessary, most frames don't have this feature).






Fino:
$5500
Fino kits come complete with everything you are going to need to build the complete car (except the Fiero, wheels, Tires and paint).

These body kits install on all Fieros. The only original Fiero body part that is retained with these kits is the forward roof section. All of the original Fiero glass is retained and additional windows as required by the body kits are included in your kit. The Fiero chassis will require no major modifications to allow these bodies to fit properly. These bodies use the majority of the original Fiero body mounting points and are REAL EASY to install. It is estimated that the average homebuilder can assemble these cars in less than 100 hours.

Because of the common styling of the doors and rocker panel sets, you can mix and match the front & rear sections of the styles AND you can mix & match the tall vs. low rear wings.


Finale:
$5500
Our Finale kits come complete with everything you need to build the complete car (except the Fiero, wheels, Tires and paint).

Because of the common styling of the doors and rocker panel sets, you can mix and match the front & rear sections of both the Finale and Fino styles. You can also mix & match the tall vs. Low rear wings.

Roadster:
$5500
Of note is that when you remove the roof from the Fiero chassis, you will need to reinforce the chassis for stiffness.]